Chipquick SMDLTLFP 982A adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed an adapter today for a 10ml Syringe and for a 5cc 15g Chipquick Solder paste syringe. These both seemed to…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed an adapter today for a 10ml Syringe and for a 5cc 15g Chipquick Solder paste syringe. These both seemed to work out well.
I drilled out the hole to get a tight fit on 3/16 brass tubing as the air connection to the 982A. I doubt a 3d printed connection that small would provide a secure mount without breaking off.
You could drill the hole to you tubing size and just glue it in with CA as the pressure I use is seldom above 20psi.
They use 1/16 o-rings. The Chipquick one has a 3/8x1/2 and the 10ml syringe uses a 1/2x5/8.
Cheers
Kisssys
Category: Electronics