Novritsch 3-9x Sniper Scope Killflash
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protect your Sniper Scope
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My existing killflash from novritsch got shot out, and I still wanted to use the killflash body, so I just made some new honeycombs for the killflash body so we can re-use it endlessly. The killflash was made with slightly thicker combs and 4mm thickeness to ensure that this thing stays in once peice, at least for a couple shots.
1: Print your new honeycombs
2: Grab your killflash with the back (or screw on portion) facing towards you.
3: There's an inner ring that can be grabbed with your nail, plyers, or a flathead screwdriver, unscrew this ring by turning it counter-clockwise.
4: Push out your damaged killflash honeycombs from front to back. You should now have three seperate peices layed out.
5: Grab your new printed honeycombs and insert it into the housing. NOTE: It should be a tight fit, You'll hear a little click or two, that means it's seated inside the housing.
6: Re-attach the inner ring to secure the new honeycomb into place.
7: your new killflash for your 3-9x variable sniper scope is ready to use