52 models
Dual mag clamp for the Novritsch SSR4 magazine (airsoft replica). Designed from scratch but inspired by this part . Novritsch logo embossed in one side. Has not been field tested yet. STEP file of the assembly included as reference. BOM…
This is a small piece I made to help keep the tube in place. cut out a matching piece of Velcro and put it under the guidance, then put it wherever you desire on your headwear.
This is a protective case that I made for the Novritsch Anti Fog Unit because I am paranoid it's getting shot at and destroyed. I printed it in PETG and used spray paint to give it it's texture. It should also be fine when printed in PLA.…
Ich habe meinen eigenen Red Dot Mount für die Novritsch SSE18 auf Grundlage des Novritsch Originals entworfen, da dieses derzeit (07.10.21) im Novritsch Webstore nicht lieferbar ist: https://eu.novritsch.com/product/sse18-red-dot-plate/…
Saw the SSE18 (https://eu.novritsch.com/product/sse18-full-auto-pistol/) in the NOVRITSCH showroom in Vienna in a mag-stand, but couldn't find the mag-stand online, so I decided to make one for it myself. Also added the .f3d (Fusion)…
Ich habe die Red Dot Plate von KnoppersDE verbessert, da dieses derzeit (28.03.2023) im Novritsch Webstore nicht lieferbar ist: https://eu.novritsch.com/product/sse18-red-dot-plate/ (Befestigung mit den Originalschrauben.) Passend für die…
This nozzle can be used with the Novritsch Anti-Fog unit (using 9mm tubing) and Wiley X glasses using comm temples. Comm temples can be recognized by their thin layout, suitable for use with over ear headset. The nozzle inlet is oriented…
This is a magazine release button guard for the Novritsch SSG11. It reduces the chances of you dropping your magazine when holding your rifle, as the button protrudes and is easily pressed on accident. Print right side up with supports. A…
Novritsch antifog 90 degrese
Recomended filament: PETG-CF or other composite filaments Required tools and consumables: Hex keys x5 M4x4x6 brass insert nut x5 M4x10 hex screw x1 M4x4 hex screw Superglue 4mm drill bit M6 screw and nut from your Novritsch holster kit…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
IMPORTANT: There's a V5 attached for stronger ''Stability Bar'' parts. Beefed up a bit and still works with the open holster flawlessly. Here's my take on a lightweight, foldable stock SSX23 Carbine Kit. Yes it still fits the SSX23…
This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…
You will need: 1x M6 54mm to go through the entire bolt 2x M3 22mm to replace the trigger guard screws 4x M3 20mm to assemble the lever parts together The bushings are used to space the lever arms away from the gun so they do not catch on…
If you're also waiting for the SSG11 skeletonized stock grip panels to mount your split bipod, or anything with M-LOK, you can print these panels as a temporary solution. They're of course not as stiff as the original CNC ones, but at…
Made a tactical lamp holder for the SSP-1, it will fit this model (available on Amazon , eBay...) of flashlight :…
Anti-Fog Adapter für Begadi CP1 Airsoft-Schutzbrillen – kompatibel mit dem Novritsch AFU-System Dieser Adapter ermöglicht die Nutzung des Novritsch AFU-Systems an den Begadi CP1-Schutzbrillen. Zum Ausschneiden der Öffnung im TPU-Rahmen…
i created a extended baseplate for the standard Novritsch SSP18 mag. I dont wanna spent a lot of money for a cool looking magazine extension so i made two. One is a bit edgy and the other is a bit orientated on the Novritsch Maxwell…
PETG would be the best to print in but I did PETG for the screw part and gray pla for the rest. it took about 60 sec to put together but the gule had to dry print the main body so it has the bb exit hole down as seen in the picture. Also,…
This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…
The Typhoon Compensator is a custom muzzle device designed specifically for the Novritsch SSP18 (and other airsoft pistols with 14mm CCW threads). Since this is a functional part that may take impacts, I recommend the following settings…
My existing killflash from novritsch got shot out, and I still wanted to use the killflash body, so I just made some new honeycombs for the killflash body so we can re-use it endlessly. The killflash was made with slightly thicker combs…
I built this for the novritsch SSG10 but I'm pretty sure it will work on other VSR10 platforms. (let me know if not) It's worked for me for a while with me running an HPA setup. I don't know how it will run with a regular spring setup.…
This custom-designed 3D-printed stand is specifically made for the Novritsch SSE18 Airsoft pistol. It not only provides a stable holder for the gun but also includes a special notch to securely hold the magazine in place. This makes it…
This shim makes the tracer unit align with the holes in the suppressor. I have it in the long suppressor but i think it will fit in the short version too. The shim stops horizontal movement where the sound baffles stop vertical movement.…
A battery cover for the Novritsch 3-9x50IR Sniper Scope. The 3mf file includes a modifier with fuzzy skin settings applied on it. If you want to apply it manually, I used 0.3mm point distance and 0.5mm thickness for fuzzy skin. Print…
Novritsch ssg96 wallmount holder allows to mount the ssg at an angle
My brother also have a P90 and really liked the Novritsch solution, we ordered a set from the SSR90 QD point, but it's counter part not included in the package: SSR90 QD Points – Novritsch | Airsoft Print it from heat resistant and…
Just a quick hardcase whipped up for the Novritsch Chronograph. Slightly thickened to offer some impact protection, but kept as small as possible to not add bulk. CA-Glued a piece of leather to the side to act as a living hinge, but feel…
I remodeled the magazine stand to mount it on the wall. The 3D files are a reinforced version of the one in the photo (It could already easily hold the weight of three magazines but I reinforced it just to be sure) All you need to mount…
an indicator you put on your extruder with magnets that spring when the extruder spins. magnets are 7mm wide and 4mm tall. made to look like the novritsch logo.
There's plenty of STL inserts for the standard open mag pouches, But I missed an efficient and compact solution for multiple mags. So I made one.
Flared Magwell for the Novritsch SSE18 The stock SSE18 magwell has no flare at all, so you have to line the magazine up almost perfectly to get it in. That's fine on the range, but it's annoying when you're moving fast or reloading under…
Printed in TPU upside down with some support. Without would be a lot better finish. Works maybe also without supports. Didn't try it out.
No hardware needed, designed to be press fit onto the existing TDC. Some force will be required, maybe light hammering. + & - indicators will require an AMS, but can be removed for non-ams printers. Only use PETG. IMPORTANT: select .12mm…
40mm airsoft granade holster for molle. Its a snag fit but if you print it in PETG it will wear off after some uses
Reduces the contact angle between the stock and your body while increasing the contact area for improved stability. Includes an optional sling attachment point. This screws in from the opposite side, requiring shorter screws on both sides…
Made this piece of SSP18 outer barrel because i destroyed 14ccw thread and i needed fast repair kit in this matter. Two versions of CW M12x1 threads compensation 0.15, 0,20. Printed with PCTG 0,4 nozzle, 0,15.
This is a locking nub that is a bit taller in order to catch on to Arcturus brand Hi-Capa rails that are shallower in depth. Slide in a square nut from one of the unused adapters and screw it into the flashlight, and it will have little…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
I built this for the novritsch SSG10 but I'm pretty sure it will work on other VSR10 platforms. (let me know if not) It's worked for me for a while with me running an HPA setup. I don't know how it will run with a regular spring setup.…
If you're also waiting for the SSG11 skeletonized stock grip panels to mount your split bipod, or anything with M-LOK, you can print these panels as a temporary solution. They're of course not as stiff as the original CNC ones, but at…
This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…
This is a magazine release button guard for the Novritsch SSG11. It reduces the chances of you dropping your magazine when holding your rifle, as the button protrudes and is easily pressed on accident. Print right side up with supports. A…
This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…
Used petg for strength but it works with pla.
Buying different holsters for all of your pistols can be costly and in most cases, you won’t even be able to holster your pistols with your favorite accessories on them. This holster is to solve that problem. Our system allows you to use…
I changed the dimensions of this part for the ssp2 based of a comment. So please give me feedback if it fit's.
