1 / 4
Drop Leg Platform for Novritsch Holsters
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rigged drop leg platform for Novritsch universal holsters for 40mm wide belts.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 122
- Makes
- 0
- Views
- 454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Recomended filament:
PETG-CF or other composite filaments
Required tools and consumables:
Hex keys
x5 M4x4x6 brass insert nut
x5 M4x10 hex screw
x1 M4x4 hex screw
Superglue
4mm drill bit
M6 screw and nut from your Novritsch holster kit
Hex screws is not mandatory. You may use another type of screws, but necessary with flat counterbore head.
Assemble
Using soldering iron insert brass nuts
Drill out 4mm holes (not necessary )
Glue the gear to lower part of platform
Assemble all parts together
