1 / 4
PTFE tube and cable holder for a 3D printer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder to keep PTFE tube and cables upright
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Secure your PTFE tube and CAN cable at the top with double zip ties. You can secure the bottom of the cable with another zip tie. The channel is designed for 6mm CAN cable. It might work for bulk of cables without the small “cover" part.
I used 2 PTFE tube couplers, and 2 PTFE tubes. There is an opening on the side so you can see if tubes are squished against each other tightly. If you want to use one longer PTFE tube, just use one coupler (or none).
You need:
- 3x M5 SHCS screws
- 10mm if you have corner bracket
- ~6-8mm if you don't – I'm not sure :)
- 3x T-nut
- 0-2x PC4-M6 coupler
- Optional for small cover
- 2x M3x 6mm SHCS screws
- 2x M3x4x5mm heatset inserts