Digital Microscope For Soldering
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Digital microscope for soldering with IP camera on OpenIPC firmware
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 41
- Makes
- 0
- Views
- 546
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Standard Digital File License
Zip archive contains three options for the microscope shell.
For build, you will need the following components:
IP camera 1 pcs
or
DC-DC Boost Power Module 1 pcs (for Micro Shell_B1 and Micro Shell_B2)
DC Connector (5.5 mm x 2.1 mm size plug) 1 pcs (for Micro Shell_A1 only)
USB 3.1 Type-C 1 pcs (for Micro Shell_B1 and Micro Shell_B2)
Dupont 3 pin socket 1 pcs
RJ45 Ethernet socket SMT SMD 56 8P8C 1 pcs
jst 1.25 mm 8 pin socket 1 pcs
Screw M3x5 3 pcs
or
Acorn Nut M3 3 pcs
Screw M2x5 4 pcs
Screw M2x5 4 pcs
unused lens something like: INDUSTAR-61 L/D 53 mm f/2.8 M39, or JUPITER 37A 135 mm f/3.5 M42 (for more magnification), or any other lens with similar characteristics. Some 30AWG wires, solder wire, flux,
T-8000 glue for thread lock 3D printed parts and fix sockets and wires.
Good luck!