1 / 3
2-Tier Stand for MPC One and Digitone
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2 tier stand for the MPC One+ and Elektron DIgitone (Also compatible with the Digitakt and Syntakt)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 519
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 2-tier desktop stand for an Akai MPC One+ and an Elektron Digitone (Also compatible with the Digitakt and Syntakt).
Each side panel is split into 3 pieces to make this printable on a Prusa Mk3 build plate.
- Print one of each side panel piece and connect them with the dovetail joints
- Print 8 x pin.stl with 100% infill. Slide the pins into the slots to lock the side panel pieces together. The pins will stay in place as long as the stand is upright, but you can use a piece of tape or a dab of glue to make them more permanent.
- Optional - Slide zip ties through the slots in the lower platform on each side
- Print 5 x bar.stl with 3 perimeters for strength.. Use the bars to connect the two sides