1 / 2
Gasket for Elegoo Centauri Carbon HEPA Filter/Muffler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
0,4mm gasket to improve seal and reduce noise and vibrations
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 68
- Makes
- 1
- Views
- 777
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To be printed in soft material like TPU, it's 0,4mm thick, you can print two layers 0,2mm each.
Works well just printed after the muffler and applied on top, like I did. If you haven't printed the muffler yet I'm also including a gasket with no holes removed and a shorter muffler, so that the gasket will sit just 0,2mm above the magnets (Use the magnet size tester on the original make first).
I also applied a very thin layer of silicone to hold the gasket in place, most adhesives should work.