1 / 5
Micro-tweaks to Nozzle RHD Rev C for Slic3r — image 1
1 / 5

Micro-tweaks to Nozzle RHD Rev C for Slic3r

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a tweaked version of the excellent MK3 Nozzle RHD Rev. C by RH_Dreambox optimized for FDM slicing with…

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
170
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

This is a tweaked version of the excellent MK3 Nozzle RHD Rev. C by RH_Dreambox optimized for FDM slicing with PrusaSlicer/Slic3r.

If you're using another slicer, and/or are able to print the shroud with another high-resolution technique (eg: SLS/SLA/DLP) you should use the original. The following tweaks are optimized for a 0.15/0.2mm layer height, 0.4mm nozzle.

The complete list of changes:

  • Tweaked the mesh under the outlet vents to force Slic3r to correctly detect all bridging perimeters (which is needed when printing with some materials)
  • Rectified part of the inner vane to force a straight bridging line, greatly reducing sagging

The tweaks to the internal mesh are sized below the effective print resolution, and designed to improve the slicing only.

  • Increased the space for the lateral blower notch by 0.2mm
  • Increased the spacing on the upper fan intake by 0.1mm

The fit on the original blower supplied by Prusa and two samples by LDO were a bit too tight in these areas.

  • Minimal extra space for the PINDA probe on the right side

Didn't like the shroud being at close contact with the PINDA on the BMG. The extra space has been carved out of the external perimeter and does not affect the internal structure.

  • Chamfered two edges around the screw holder.

Because we can.

Category: 3D Printer Extruders

Tags