1 / 2
Multi-part Cartridge for ESPHome Cartridge Player — image 1
1 / 2

Multi-part Cartridge for ESPHome Cartridge Player

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I found it hard to get a good quality surface for the sticker to attach to, so I split the top part into 3.

Rating
5 / 5
Likes
12
Downloads
65
Makes
1
Views
311
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

As I found it hard to get a good surface finish for the label to stick to (for the recessed version), I redesigned the cartridge for easier printing without supports. I also had a struggle getting the label to the correct size and a nice fit. I also dont have MMU and I did not like the finish of the arrow.

The “problem”


 
My solution





Cut and attach your label to the part first, i used a knife to cut the label along the edge. Then glue the parts together with CA glue. The arrow needs just a very small amount since it press fits. Make sure the glue don't creep out on the front, as it may discolor your cartridge!

Results
Printing

All parts are oriented in their intended printing orientation, no supports needed.

Tags