1 / 1
ACK E-01 / E-04 Remote Switch Screw Backplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Backplate for ACK E-01 / E-04 Remote Switch
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
This is a backplate for the ACK E-01 or E-04 ELT remote switch. This allows you to eliminate the backing nuts allowing for easier removal/installation.
Print Settings:
- Quality: 0.2mm
- Infill: Any %
- Supports: None
- Orientation: Horizontal
- Material Recommendations: ABS or ASA
Notes:
- Do not print vertically
Terms & Conditions:
- This model is intended for use by general aviation (GA) aircraft owner/operators as an owner produced part and is free to use for that purpose.
- Commercial production and/or sale not permitted, license available upon request.