Counting matching models…
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…
Print approx. €9.99–€12.20 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €33.41–€40.84 excl. taxPreliminary estimate for one variant
Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly). If you are…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
A compact hanger designed for organizing belts or light handbags inside a wardrobe. It holds up to 6 belts and features a freely rotating hook, allowing the hanger to turn around its axis. This makes it easy to orient it in the closet so…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Quick Release Buckle Clip (backpack & belt Clip)
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
These models are modular in design and made to connect to each other.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore --- I released a new version with only two screws --- Fits on Prusa MK3 MK3s MK3s+ Fasteners: 1x M3x20 screw 2x M3x10 screw 3x M3 hex nut 4x M3 Nyloc hex nuts 4x…
Print approx. €2.27–€2.78 excl. taxPreliminary estimate for PETGSource material: PET
A simple seat belt clip version 2 This clip is intended to hold the buckle in desired position. Somehow the seat belt buckle position is quite low on my car and it's kind of tiring to pick. I designed it for my car (BMW F22 2 series…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €19.22–€23.49 excl. taxPreliminary estimate for one variant
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a belt tensioner for the x-axis of the Neptune 2 and 2S from Elegoo. Since the geometry and the structure of the X-axis differ greatly from the Ender, the complete body had to be rebuilt. Since the source data is not available, I…
Print approx. €18.08–€22.10 excl. taxPreliminary estimate for one variant
Easy to print, no support cave with window, for shrimps and small fish with window
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
A string of six Nerf X-shot crusher shell casings for nerf dart ammo belt. Fully integrated with original nerf belt. All six darts can be printed in place, just sacrificing a little cross sectional area that is more for aesthetics than it…
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
The frame of the tensioner ist bolted to the x-gantry. That makes it stiffer and it fits better to the aluminium bar. It also doesn't twist while the printer is moving along the x-axis. New parts required: 1x DIN M8 Screw 30mm or longer…
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for PETGSource material: PET
This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore Fits on Prusa MK3 MK3s MK3s+ Fasteners: 2x M3x10 screw 2x M3 hex nut 2x M3 Nyloc hex nuts 2x M3x16 screws 1x 3x22 mm cylindrical pin (ISO 8734 / DIN 6325) or cut…
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for PETGSource material: PET
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
Very practical sandpaper holder. If the sandpaper is used up, the sanding belt can simply be moved a few centimeters. The sandpaper belt holder consists of 3 printed components: Block Tensioner Eccentric Other accessories: Cylindrical pin…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for one variant
The Vegvisir, also known as the runic compass or the Viking compass/Nordic compass made of eight Viking rune staves, is a symbol of protection and guidance believed to be used as a compass by Vikings. The word vegvisir means ‘wayfinder’…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
This is a working melting clock from the famous painting The Persistence of Memory by Salvador Dali. The 3 clock hands orbit in the horizontal plane for the “regular” part of the clock that lies on the green block and switch to a vertical…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Optional fan enhance the cooling of the brushless motor compartment. Just slide-in the fan into the motor shaft.
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
I designed this belt buckle to turn a broken laptop bag strap into a pants belt. Remove the parts in red on the picture.
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
This meter measures the displacement of a belt when a force is applied to determine the tension in that belt. Using a 30mm or 50mm span to support the belt and a dial indicator to press down in the middle of the supports, the belt tension…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 37mm x 29mm 6mm Keyring hole
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
I took the great design of Ornoterms and replaced the holes with easy snap fits.
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
This model is a magnetic chalk clip designed for Triangle chalk, but any chalk of the same dimension should work (as they are all roughly the same size). There is a magnet embedded in the chalk holder and the chalk clip so that the clip…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Belt holder for two belts with maximum width of 40mm. Maximum buckle width 53mm. Printing instructions Orientation: As shown in the first picture Supports: Not needed Layer height: 0,20mm or more Material: PLA, PETG Infill: 10% Raft: Not…
Print approx. €16.69–€20.40 excl. taxPreliminary estimate for PETGSource material: PET
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for PETGSource material: PET
Print on the thin edge face with snug supports to prevent the pegs shearing off. See the attached gcode for reference. Trim the T shaped peg if it is tight. Any elephant foot will make it very tight on that one side, so examine the bed…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Tablet weaving (youtube.com) TABLET WEAVING (weaversguildnorthshore.org) Jak tkát na karetkách? (youtube.com)
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
Voici un support pour la Freebox Delta, à visser au mur. Comme il s'agissait d'un de mes premiers design 3D après longtemps, j'en ai écrit un article de blog (en anglais) :…
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
This is a snap-close case for the heltec ESP32 WIFI_kit (this one: https://www.amazon.com/gp/product/B094MYK5DM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Should print like a charm, but if you need to relax the tolerances more I've…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
stackable belts organizer, two versions, height 50 and 60mm
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for PETGSource material: PET
Introduction A fun and physical way to keep track of your spell slots. This tray has slots and tokens to track spells for wizards, druids, sorcerers, clerics, and bards up to level 20. When you use a spell, remove one of the corresponding…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
This build is for a chalk holder for snooker/pool. I've looked at a few online but couldn't find one that suited my needs so, in fusion I designed this simple clip with a removable chalk holder. the clip and the chalk holder will take a…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
This is a zero clearance insert for a Delta Rockwell 14" band saw. It was modelled on a 1950 model, but should fit a wide range of vintages. Fusion 360 model file is included if you need to tweak it.
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Wall Art silhouette model of the Lamborghini Revuelto.Adjustable size. I accept model suggestions you might want or like
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a touch of timeless elegance with the Celtic Knot Coaster! With a diameter of 100 mm and a thickness of 4 mm, this intricately designed coaster…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
This fits my Delta 36-670 table saw and will work great for crosscut sleds or one off sleds. I printed it diagonally to fit on my large printer. I have included the gcode for the Elegoo Neptune 4 Plus.
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Druckbare und personalisierbare Gürtelschnalle. Zwei Vorlagen sind ohne Text und Muster um von euch personalisiert zu werden ;). Der Gürtel darf maximal 3mm stark und 40mm breit sein. Zum zusammenbauen benötigst du: 2x…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Designed this cradle to hold the seat belt acceptor (female end) for a toyota rear seat. Helps keep things in place- lessens the slack and the movement when trying to buckle in ( makes it easier for kids) Printed in Glow PLA Disclaimer:…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
Melting Skull Goblet
Print approx. €13.65–€16.68 excl. taxPreliminary estimate for one variant
Vor- und Nachteile auf einen Blick: + verbindung oder verlängerung von GT2 6 mm Zahnriemen + schmarl/klein/minimalistisch + Druckerfreundlich (Überhänge >55°, keine Brücken, etc.) + wiederverwendung von defekten Zahnriemen Einkaufsliste:…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
This set of cards for Celtic weaving is designed for creating decorative belts, straps, bands, or bracelets. The cards can be used with finer materials such as wool, cotton, or yarn, as well as thicker cords and strings. The result is…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
It does not require supports. Printout to be assembled from 2 parts. Easy to scale the size you need.
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
It's exactly what the title says. If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 You just need: 1x M3 Square Nut (trimmed like in the pic and) 1x M3 Screw of your desired length…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Distressed Celtic Pendant
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
I needed a holder for a Heltec V3 when setting up my Meshcore room server, it has no need for a battery and only an internal style ariel. its very compact but protects the unit from bumps etc. When sliding it in ensure you hold back the…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Speedloader for the 9mm magazine for the Keltec PF9. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print it upright with a 10mm…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
You’ve gotta be kiddin’ me. You’re kiddin’, right? C’mon kid, Eurodyne? You ain’t heard of Kerry Eurodyne? Psh, well, one of us must be getting old. This piece is for him, for the rockerboy legend himself. Damn, you should’ve heard him…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
By my opinion raft-only (sheltie-raft only.stl) version is tough enough, choice is yours. Verze bez střední kruhové výstuže se mi zdá dostatečně pevná sama o sobě. Printed with PLA (0.2) Infill doesn't matter, 10% - 15%
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Replacement drum belt tension pulley for AEG tumble dryer. The original pulley is not equipped with bearings (only an embedded metal roller) and therefore jammed over time and caused the belt to tear. I therefore fitted the new pulley…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
Nach dem Drucken der Teile Führungen schleifen, Gewinde in Boden und Deckelschaniere bohren M4. Am Teil LinksUntenHinten Druckstütze entfernen. Zusammenbau nach ZB-Bildern. Die 1ste Kugel verhindert das öffnen des ersten Riegels…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
This is a sanding block for sanding belts 457mm x 75mm. The print consists of two printed parts (no screws, shafts etc. needed) I recomend using the 3mf/gcode files because of the already placed supports. This thing needs supports! (see…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Buckle for 36mm/1.4inch width belt. Print Settings Printer Brand Prusa Printer MINIIS Resolution .15 mm Infill 100% Filament Prusament PLA Recycled Build Plate Textured steel sheet Added paint-on fuzzy skin to imitate the feeling of the…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
This model was designed to create some fixing points around the perimeter of the FLSUN Super Racer Printer. The shelves can be used for storage and the holes can be used to afix various items. These fixing points can be used to support…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for one variant
Replaces the stock belt clip for the Zippypaws treat pouch. Mine was just gone - not sure if it broke or fell off. This replacement version has a width of 16mm. The stitching on the clip slot was inconsistent. I included the f3d file with…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
More photos to come once I have printed and assembled the model.
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
I have created a Model to print those fragile seatback retention clips in the trunk of the Ford III. I have printed them as rigidly as possible and used PETG for best layer adhesion. The support comes off quite easily, I'd however suggest…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
I remixed this Y axis end because lets just say the MK2's Y-corners are just a PITA, so with this upgrade you can throw away the printed corners and the 8mm rods that come with it. This remix includes a built in belt tenisoning system If…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Same model as the one from Will, but the text is centered, and the font is replaced with the official Prusa logo font (FreeSans).
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
Another necessary costume element for Rumi's Golden Outfit- its the thing that hangs on her belt, whatever it should be called. I saw people use beads and jewelry tools, but this was quick and lightweight. Sized for an adult costume, and…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Keine Stützen nötig
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Very simple Airtag holder that prints without supports. Print instructions: I recommend to print it in PETG or ASA or ABS if used outside.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Small and easily detachable molle pouch holder. The big clip is for easy access on belts.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
The Delta-P Duct is an awesome concept. While there are already designs for fitting an endoscope camera, I wanted a system where the camera could be easily removed without disturbing the extruder cooling and restore the excellent view of…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Felt Edge Squeegee for Vinyl Print in the desired size and glue the felt over the edge.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Coin with a celtic knot engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I wanted an X axis belt tensioner for my Anycubic mega zero 2.0 and ( Tronxy X3 x-belt tensioner ) almost worked so i made this which works perfectly!! Printing instructions: 0.28 pla infill 0% 2 walls supports
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Da wir das Gerät nur bei Gebrauch aufstellen, nervte mich auf Dauer das Kabel. Ich habe eine einfach anzusteckende “Kabeltrommel” entworfen, damit endlich Ordnung bei Nichtgebrauch entsteht.
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant
I'm not a fan of stickers so I created a 3d printed version of the punk rock shirt and belt design with filament swaps. Note this should be scaled to any 10:1 scale Lego model. Note I used 0.20mm layer heights. Punk Neck: All white for…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Parts Required to Complete: SmallRig Mini V Mount Battery Plate with Belt Clip 2990 V Mount Accessory Plate ( 3D printed or from SmallRig MD2801 ) M3 x 6 Flat Head Screws (3) Battery Strap Velcro, Servo Tape, or Non-Slip Pad Why I Made…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for PETGSource material: PET
Tento 3D tisknutelný držák zadního bezpečnostního pásu je navržen pro vozy Ford S-MAX a Ford Galaxy . Ideální pro kutily, kteří chtějí nahradit nebo vylepšit stávající držák. Vlastnosti: Kompatibilní se zadními sedadly Ford S-MAX / Galaxy…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
These are various devices I have come up with to help the grandkids (&/or parents) un-do the release buckle on car seats. All work but every kid seems to have their own preference.
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
Belt hanger for hanging over a rod in the closet. Print without support with 20% infill. In the version for 8 and 10 belts, it is possible to connect the hook to the body using instant glue.
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
Tested and printed in Colorfabb XT Black , recommend for PETG . One piece, simple operation.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
I have a Keltec PF9. It has a belt clip. I have found this to be handy. I like the minimalist belt clip for IWB carry. I DON'T like carrying without the trigger covered. So I carried with the chamber empty. I didn't like carrying with the…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
