Wyniki wyszukiwania: elt

Delta-P fan duct V2-R2 for MK3S(+) extruder

July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…

X-Axis revision with belt tensioner

I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…

Darth Vader Melted - Star Wars Home Decoration

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Prusa Core One (+ Gen 1 / + Gen 2 / L) Belt Tension Gauge (New V2 Design)

Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly). If you are…

Belt Hanger

A compact hanger designed for organizing belts or light handbags inside a wardrobe. It holds up to 6 belts and features a freely rotating hook, allowing the hanger to turn around its axis. This makes it easy to orient it in the closet so…

Quick Release Buckle Clip (backpack & belt Clip)

Quick Release Buckle Clip (backpack & belt Clip)

Factorio Transport Belts

These models are modular in design and made to connect to each other.

Y-axis belt tensioner

Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore --- I released a new version with only two screws --- Fits on Prusa MK3 MK3s MK3s+ Fasteners: 1x M3x20 screw 2x M3x10 screw 3x M3 hex nut 4x M3 Nyloc hex nuts 4x…

Simple seat belt clip ver.2

A simple seat belt clip version 2 This clip is intended to hold the buckle in desired position. Somehow the seat belt buckle position is quite low on my car and it's kind of tiring to pick. I designed it for my car (BMW F22 2 series…

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Darth Vader Melted Mask - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Belt tensioner for Elegoo Neptune 2 and 2S for the x-axis

This is a belt tensioner for the x-axis of the Neptune 2 and 2S from Elegoo. Since the geometry and the structure of the X-axis differ greatly from the Ender, the complete body had to be rebuilt. Since the source data is not available, I…

Aquarium shrimp, small fish cave, home, house, shelter

Easy to print, no support cave with window, for shrimps and small fish with window

X-Shot Crusher PIP Dart Belt x6

A string of six Nerf X-shot crusher shell casings for nerf dart ammo belt. Fully integrated with original nerf belt. All six darts can be printed in place, just sacrificing a little cross sectional area that is more for aesthetics than it…

Prusa MK3.5/MK3.9/MK4 centre tray/cable tidy (now works with Y belt tensioners and Prusa enclosure)

To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…

Prusa MK3s y-axis belt holder - GT2

I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…

X-axis upgrade with linear rail, belt tensioner and bearing clamping - Prusa MK3 / MK3s / MK3s+

If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…

Better Ender 3 X Belt Tensioner

The frame of the tensioner ist bolted to the x-gantry. That makes it stiffer and it fits better to the aluminium bar. It also doesn't twist while the printer is moving along the x-axis. New parts required: 1x DIN M8 Screw 30mm or longer…

Prusa mk3 Y axis Adjustable Belt Tensioner and BED Holder with Paralelism and compatible with other Mods

This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…

Dual Z Belt Tensioner - Ender CR Neptune Kobra Aquila Gemini XY

This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…

Railway trackside shelter 1:87 H0

Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…

Y-axis belt tensioner V2

Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore Fits on Prusa MK3 MK3s MK3s+ Fasteners: 2x M3x10 screw 2x M3 hex nut 2x M3 Nyloc hex nuts 2x M3x16 screws 1x 3x22 mm cylindrical pin (ISO 8734 / DIN 6325) or cut…

Child safety lock for seat belt (3 versions) // Kindersicherung für Sicherheitsgurt PKW (3 Versionen)

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…

Better Toothpaste Squeezer with angled slot | Tubenausdrücker mit gewinkeltem Schlitz

english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

Grinding block - Sandpaper Belt (303 mm x 40 mm)

Very practical sandpaper holder. If the sandpaper is used up, the sanding belt can simply be moved a few centimeters. The sandpaper belt holder consists of 3 printed components: Block Tensioner Eccentric Other accessories: Cylindrical pin…

Coaster Celtic Rune Compass

The Vegvisir, also known as the runic compass or the Viking compass/Nordic compass made of eight Viking rune staves, is a symbol of protection and guidance believed to be used as a compass by Vikings. The word vegvisir means ‘wayfinder’…

Melting Dali Clock

This is a working melting clock from the famous painting The Persistence of Memory by Salvador Dali. The 3 clock hands orbit in the horizontal plane for the “regular” part of the clock that lies on the green block and switch to a vertical…

BeltDrive 4x4 Brushless Cooling Fan

Optional fan enhance the cooling of the brushless motor compartment. Just slide-in the fan into the motor shaft.

Z - Riemen Spanner "belt tensioner"

Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.

Belt Buckle

I designed this belt buckle to turn a broken laptop bag strap into a pants belt. Remove the parts in red on the picture.

Belt Tension Tester Using a Dial Indicator

This meter measures the displacement of a belt when a force is applied to determine the tension in that belt. Using a 30mm or 50mm span to support the belt and a dial indicator to press down in the middle of the supports, the belt tension…

Heartfelt Memories – Photo Frame

Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…

Seatbelt Warning Light KeyChain

keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 37mm x 29mm 6mm Keyring hole

Heltec Esp32+LoRa+OLED self closing case

I took the great design of Ornoterms and replaced the holes with easy snap fits.

Hook Belt Buckle - Waistband Buckle - VR Strap Buckle - 46mm Hole - 50mm Strap - Variations - Tension Buckle

So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…

Belt holder for two belts

Belt holder for two belts with maximum width of 40mm. Maximum buckle width 53mm. Printing instructions Orientation: As shown in the first picture Supports: Not needed Layer height: 0,20mm or more Material: PLA, PETG Infill: 10% Raft: Not…

Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts

Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…

GI Joe APC Seatbelt

Print on the thin edge face with snug supports to prevent the pegs shearing off. See the attached gcode for reference. Trim the T shaped peg if it is tight. Any elephant foot will make it very tight on that one side, so examine the bed…

Celtic Tablet Weaving

Tablet weaving (youtube.com) TABLET WEAVING (weaversguildnorthshore.org) Jak tkát na karetkách? (youtube.com)

Support mural Freebox Delta

Voici un support pour la Freebox Delta, à visser au mur. Comme il s'agissait d'un de mes premiers design 3D après longtemps, j'en ai écrit un article de blog (en anglais) :…

Heltec WIFI_KIT-32 Snap-Close Enclosure

This is a snap-close case for the heltec ESP32 WIFI_kit (this one: https://www.amazon.com/gp/product/B094MYK5DM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Should print like a charm, but if you need to relax the tolerances more I've…

Belts organizer

stackable belts organizer, two versions, height 50 and 60mm

Celtic Spell Slot Tracker (DnD 5e)

Introduction A fun and physical way to keep track of your spell slots. This tray has slots and tokens to track spells for wizards, druids, sorcerers, clerics, and bards up to level 20. When you use a spell, remove one of the corresponding…

BeltDrive 4x4 - 3536 size brushless motor

To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).

Delta Band Saw Insert

This is a zero clearance insert for a Delta Rockwell 14" band saw. It was modelled on a 1950 model, but should fit a wide range of vintages. Fusion 360 model file is included if you need to tweak it.

Lamborghini Revuelto Wall Art

Wall Art silhouette model of the Lamborghini Revuelto.Adjustable size. I accept model suggestions you might want or like

Z belt tensioner w. filament sensor bracket Ender 3 V3 KE

Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…

Celtic Knot Coaster - Triquetra

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a touch of timeless elegance with the Celtic Knot Coaster! With a diameter of 100 mm and a thickness of 4 mm, this intricately designed coaster…

MK4 Y-Axis belt tensioner MK3/S/S+

Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…

Delta 36-670 table saw miter slot slide

This fits my Delta 36-670 table saw and will work great for crosscut sleds or one off sleds. I printed it diagonally to fit on my large printer. I have included the gcode for the Elegoo Neptune 4 Plus.

Seat belt cradle / holder

Designed this cradle to hold the seat belt acceptor (female end) for a toyota rear seat. Helps keep things in place- lessens the slack and the movement when trying to buckle in ( makes it easier for kids) Printed in Glow PLA Disclaimer:…

Melting Skull Goblet

Melting Skull Goblet

GT2 6 mm timing belt repair or fastener/bond (close loop) for reusing 2 old/defect belt as one on y-axis

Vor- und Nachteile auf einen Blick: + verbindung oder verlängerung von GT2 6 mm Zahnriemen + schmarl/klein/minimalistisch + Druckerfreundlich (Überhänge >55°, keine Brücken, etc.) + wiederverwendung von defekten Zahnriemen Einkaufsliste:…

Keltec P32 Magazine Speedloader (and P3AT)

Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…

Celtic Weaving – Set of Cards for Belts and Bracelets

This set of cards for Celtic weaving is designed for creating decorative belts, straps, bands, or bracelets. The cards can be used with finer materials such as wool, cotton, or yarn, as well as thicker cords and strings. The result is…

Shrimp shelter / cave

It does not require supports. Printout to be assembled from 2 parts. Easy to scale the size you need.

Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…

GT2 Belt Tensioner for Drawbot & 2020 Profile Laser Engravers

It's exactly what the title says. If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 You just need: 1x M3 Square Nut (trimmed like in the pic and) 1x M3 Screw of your desired length…

Distressed Celtic Pendant

Distressed Celtic Pendant

Heltec V3 and V4 minimal mount / holder with ariel

I needed a holder for a Heltec V3 when setting up my Meshcore room server, it has no need for a battery and only an internal style ariel. its very compact but protects the unit from bumps etc. When sliding it in ensure you hold back the…

Super Deluxe Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…

Keltec PF9 Magazine Speedloader

Speedloader for the 9mm magazine for the Keltec PF9. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print it upright with a 10mm…

Cyberpunk 2077 — Kerry’s Belt Buckle

You’ve gotta be kiddin’ me. You’re kiddin’, right? C’mon kid, Eurodyne? You ain’t heard of Kerry Eurodyne? Psh, well, one of us must be getting old. This piece is for him, for the rockerboy legend himself. Damn, you should’ve heard him…

Heltech Wireless Paper Desk Stand

Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.

Replacement belt tension pulley for AEG tumble dryer.

Replacement drum belt tension pulley for AEG tumble dryer. The original pulley is not equipped with bearings (only an embedded metal roller) and therefore jammed over time and caused the belt to tear. I therefore fitted the new pulley…

Schatzkiste mit doppeltem Boden

Nach dem Drucken der Teile Führungen schleifen, Gewinde in Boden und Deckelschaniere bohren M4. Am Teil LinksUntenHinten Druckstütze entfernen. Zusammenbau nach ZB-Bildern. Die 1ste Kugel verhindert das öffnen des ersten Riegels…

Sanding Belt Block (457x75)

This is a sanding block for sanding belts 457mm x 75mm. The print consists of two printed parts (no screws, shafts etc. needed) I recomend using the 3mf/gcode files because of the already placed supports. This thing needs supports! (see…

Belt's buckle (1.4inch remix)

Buckle for 36mm/1.4inch width belt. Print Settings Printer Brand Prusa Printer MINIIS Resolution .15 mm Infill 100% Filament Prusament PLA Recycled Build Plate Textured steel sheet Added paint-on fuzzy skin to imitate the feeling of the…

Shelf for FLSUN Super Racer Delta Printer

This model was designed to create some fixing points around the perimeter of the FLSUN Super Racer Printer. The shelves can be used for storage and the holes can be used to afix various items. These fixing points can be used to support…

ZippyPaws dog treat bag replacement belt clip

Replaces the stock belt clip for the Zippypaws treat pouch. Mine was just gone - not sure if it broke or fell off. This replacement version has a width of 16mm. The stitching on the clip slot was inconsistent. I included the f3d file with…

Theodore Roosevelt Bust and "Man in the Arena" Base

More photos to come once I have printed and assembled the model.

Ford Galaxy Seatbelt retention clip

I have created a Model to print those fragile seatback retention clips in the trunk of the Ford III. I have printed them as rigidly as possible and used PETG for best layer adhesion. The support comes off quite easily, I'd however suggest…

Belt Clip, UMS V1

Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…

Scuba weight belt slide stopper

Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…

Celtic Tablet Weaving - thin card

Rumi Belt Design or Hanging Jewelry Charm

Another necessary costume element for Rumi's Golden Outfit- its the thing that hangs on her belt, whatever it should be called. I saw people use beads and jewelry tools, but this was quick and lightweight. Sized for an adult costume, and…

Mustache Coin (Novelty, US Quarter, and Euro Sizes Included)

Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .

Belts Strap Holder

This belt strap holder is made for simple and quick hanging of straps on a belt or waistband.

Hohwanddosen_Abdeckung_Doppelt

Keine Stützen nötig

Airtag holder for dobbeltsidet tape

Very simple Airtag holder that prints without supports. Print instructions: I recommend to print it in PETG or ASA or ABS if used outside.

Felt Edge Squeegee for Vinyl

Felt Edge Squeegee for Vinyl Print in the desired size and glue the felt over the edge.

Celtic Knot Coin

Coin with a celtic knot engraved in it. Uses art from PublicDomainVectors.org .

Tronxy X3 x-belt tensioner (remix for mega zero 2.0)

I wanted an X axis belt tensioner for my Anycubic mega zero 2.0 and ( Tronxy X3 x-belt tensioner ) almost worked so i made this which works perfectly!! Printing instructions: 0.28 pla infill 0% 2 walls supports

Kabeltrommel für Ninja Foodi Max Dual Zone Air Fryer

Da wir das Gerät nur bei Gebrauch aufstellen, nervte mich auf Dauer das Kabel. Ich habe eine einfach anzusteckende “Kabeltrommel” entworfen, damit endlich Ordnung bei Nichtgebrauch entsteht.

Lego Punk Rock Shirt and Belt Design

I'm not a fan of stickers so I created a 3d printed version of the punk rock shirt and belt design with filament swaps. Note this should be scaled to any 10:1 scale Lego model. Note I used 0.20mm layer heights. Punk Neck: All white for…

LiPo Battery Carrier for Belt Clip

Parts Required to Complete: SmallRig Mini V Mount Battery Plate with Belt Clip 2990 V Mount Accessory Plate ( 3D printed or from SmallRig MD2801 ) M3 x 6 Flat Head Screws (3) Battery Strap Velcro, Servo Tape, or Non-Slip Pad Why I Made…

Rear Seat Belt Bracket for Ford S-MAX / Galaxy

Tento 3D tisknutelný držák zadního bezpečnostního pásu je navržen pro vozy Ford S-MAX a Ford Galaxy . Ideální pro kutily, kteří chtějí nahradit nebo vylepšit stávající držák. Vlastnosti: Kompatibilní se zadními sedadly Ford S-MAX / Galaxy…

Various Child Car Seat Belt Buckle Release Assist Mechanisms

These are various devices I have come up with to help the grandkids (&/or parents) un-do the release buckle on car seats. All work but every kid seems to have their own preference.

Belt hanger for 4-10 belts.

Belt hanger for hanging over a rod in the closet. Print without support with 20% infill. In the version for 8 and 10 belts, it is possible to connect the hook to the body using instant glue.

Airtag Holder for straps, collars and belts

Tested and printed in Colorfabb XT Black , recommend for PETG . One piece, simple operation.

Keltec PF9 Trigger Block

I have a Keltec PF9. It has a belt clip. I have found this to be handy. I like the minimalist belt clip for IWB carry. I DON'T like carrying without the trigger covered. So I carried with the chamber empty. I didn't like carrying with the…

Weltkarte Geldgeschenk

Dies ist ein kreatives Geschenk, wenn Sie Geld verschenken möchten. Einfach beide Teile ausdrucken, den gewünscheten Betrag in die Hülle legen und das Weltkartenteil daraufdrücken. Dieses klemmt dann perfekt darauf.

Multiple belts from downcycled climbing rope

The Ingenious Robust BUCKLES models from rorys3D inspired me to built some belts from old climbing ropes. buckle_17 – to built a belt from a single sheath of ~9.8mm climbing rope (which is about 17mm wide when flat). double_buckle_12 – to…

Filamentabroller - Doppelte Version (DV)

Filamentabroller - Doppelte Version (DV) du benötigst folgende Normteile: 4x Kugellager 6200 2RS oder 6200 ZZ 2x Stück PTFE-Schlauch Vor dem Druck würde ich empfehlen die Toleranzdateien zu drucken (im Projekt ist das 0mm…

Beauxbaton felt hat form

Check the temps on g-code, I raised the temps 10' for my personal prints. The g-code makes a 21" hat form, this fits my 12 year old. The code barely fits on the platform of my mk3. When I converted if from the original stl's I enlarged it…

Timing Belts

It is an Xl timing belt pulley. One with two sides construction and one with one side construction. It has 30 teeth and had an inside width of 10,922mm Have fun!

Safety stop belt (zarážka bezpečnostního pásu)

"Šidítko" na bezpečností pás. Tištěno PETG filamentem.

Power button Adapter for Heltec Lora 32 case for meshtastic

I had to buy different power button for the case. Drilled a hole and glued it in place. This button is the adapter to make it work. On/off switches: https://www.amazon.se/dp/B0CB8D2HW3 Original model:…