Bissell vacuum attachment You didn't know You needed! (34.5mm insertable type)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a modular vacuum attachment set for Bissell Vacuum cleaner. Consists of longer crevice, hook and side attachment
- Rating
- 5 / 5
- Likes
- 201
- Downloads
- 303
- Makes
- 0
- Views
- 2,973
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Why?
I needed to clean heating radiators inside my apartment building. I have a cheaper Bissell PowerForce vacuum that came with ridiculously small crevice tool, so it was almost impossible to reach the insides of radiator.
I decided to make a larger one!.. And then a weird one! And then even weirder one! And I made them snap on each other.
What?
Like I said - It's a set contains three attachments for harder-to-reach and narrow places:
- BASE - Longer than stock Crevice attachment (220mm compared to stock 146mm)
- ATTACHES TO THE BASE - Hook-type Crevice attachment for the cases when you need to reach kinda around something unreachable
- ATTACHES TO THE BASE - Side Crevice attachment - when You need to vacuum something not in front of the nozzle, but on it's side.
Works simple: First You attach Crevice BASE piece. Then on top of it (if You need it) You attach other pieces.
It should work with any vacuum that have a tube with inner diameter of 34.5mm. Attachment goes INSIDE the tube, not around it.
Printing
I used grey PLA Plus. 3 walls, 20% infill. I used 0.24mm layer for speed, but You free to use any.
Base attachment and side-attachment don't need any supports.
Hook-attachment REQUIRES SUPPORT. I used “Snug” support ON BUILD PLATE ONLY.
Brim is recommended for better adhesion.
P.S.
I understand that it's pretty narrow use-case for that pieces. Yet I still think it can be useful for someone. Let me know in a comments if You find it useful!
I'll Also Include the STEP files of BASE model and Base-addon so You can remix and build even more attachments, if You need it!
