Composite Demoulding Wedges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These demoulding wedges are used for the releasing/demoulding of carbon and glass fibre composite parts.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 79
- Makes
- 2
- Views
- 128
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
These demoulding wedges are used for the releasing/demoulding of carbon and glass fibre composite parts.
Models are available in two sizes ( L x W x H )
Small : 57 mm x 30 mm x 7 mm
Medium : 77 mm x 40 mm x 11 mm
The tip of the wedges have a radius of 0.2mm to allow the part to be printed with a 0.4mm nozzle.
I print mine as follows
Material : PLA or PETG
Layer Height : 0.2 mm
Walls : 6
Infill : 15 %
Print in the orientation shown below.
I would also suggest printing with a brim, or adding ‘mouse ears’ to the tip when slicing to prevent any lifting issues due to the nature of the part.
