1 / 7
Qanba 2009 Brook OLED display mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Qanba 2009 Gaming Table Brook OLED display mount instead of the USB multi switch (A,B,C,D)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
I replaced the USB Board with the Brook Gen5. I used the Hailege SSD1309 2.42 inch OLED Display. There are some small screws required and a bit of superglue. I re-used the small screws that came in the ABCD switcher.
You only need to glue the 2 blocks to the topplate. After this you can screw everything into place quite easily. Just make sure to align the display before screwing it in fully. Dont screw in to hard. I just needs to hold it.
I printed this on a 0,4 nozzle with 0,2 layer height. No supports required.