1 / 3
Parametric horizontal orientation holes hack test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This is a model for testing horizontal holes test hack.
The model contains 6 holes with angle on top starting from 90° to 140° and an additional fully round hole.
The model is parametrized. The main parameter is hole_diameter. Set it to the desired dimension including an offset.
For example, you can set it to 6.2mm to test fit an M6 screw.
Parameter thickness controls the overall depth of the block.
I am also incluing models for 4.2mm, 6.2mm and 10.2mm holes sizes.