1515 Tee Nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple little carriers that prevent a m3 nut from sliding in a 1515 extrusion channel. They also position the nut…
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 254
- Makes
- 3
- Views
- 1,101
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Simple little carriers that prevent a m3 nut from sliding in a 1515 extrusion channel. They also position the nut nearer to the face of the channel so they are easier to capture by a m3 screw. The hole in the back is slightly undersized so it acts somewhat like a nyloc.
They probably will work with M3 hex nuts too.
I printed them out of PLA.
NOTE: They are designed for 0.2mm layer height with first layer being 0.3mm. If you use 0.2mm for your first layer, you should scale them to be 0.1mm taller in Z with the slicer before printing.
F360 source included if you need to tweak them.
Category: 3D Printer Parts