Kitchen Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
kitchen holder, for skewers, straws, etc., uses HT pipes with a diameter of 32mm
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 58
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
holder for skewers, straws or similar things in the kitchen, the model uses HT pipe with a diameter of 32 mm/1.8 mm. The pipe can be purchased at any hobby market or building supply store.
Print Prusament PetG
0,4n
0,2 - 0,25mm structural
3 perimeters
20% infill
rectilinear or gyroid
The pipe can be easily cut, e.g. with a hacksaw, and then the edges can be sanded with fine sandpaper.
I used 3.5*20 mm wood screws
I recommend marking the holes precisely and pre-drilling with a 2mm drill bit. Screw in precisely and perpendicularly. Tighten gently.
A horizontal position can also be used, in this position I recommend fixing the parts with superglue.
