Deburring Tool Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case for a deburring tool.
- Rating
- 4 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 207
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
When i bought my deburring tool, it came in just the retail box, so i modeled a case to hold it and the blades safely.
Design is completely print in place, prints fine on a Creality K1C, recommended 0.2 mm layer height. Hinges may come out a little stiff at first, but they just need to be moved around a little.
Case was designed for a Meec Tools deburrer, but from what I've seen it should fit other similarily sized ones. The dimensions are as follows:
Handle width - 12 (11.8) mm (flat side to flat side)
Handle length - 126 mm
Blade thickness - 3 mm
Blade length - 46 mm
Feel free to leave suggestions and report issues, this is my first real model so there is bound to be problems ._.'