Fireflies Flashlight Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple stand for most Fireflies V2/2025 flashlights with USB-C charging, including the E04 Surge, NOV-Mu V2S, etc.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print your own stand for your various Fireflies flashlights! I wanted a few different options for my lights, and in different materials than the standard one you can buy from Fireflies.
I've included three different versions depending on your needs. One with a standard, closed notch for a pocket clip, similar to the stock version. One with an open notch that goes all the way through the stand, ideal if you have a lanyard attached. One with no notch at all for lights with no clip installed, for a clean uniform look.
I modeled and tested this using my E04 Surge, NOV-Mu V2S, and E07X Cannon V2. From what I can tell, the other V2/2025 lights (X4 Stellar, E90 Blaze, and X1S Pharos) likely use the same body tube/end cap style and should also work, but if anyone prints this for one of those please let me know! I have an X4 in the mail and will test that when it arrives.
I do not know if this will fit their right angle or non-USB-C charging lights (e.g., X1Q Core or L70 Helios).
Photos show it printed in Prusament Woodfill Linden Light, 0.20mm structural setting, with 15% gyroid infill, but you should be able to print this pretty easily with most other settings. PLA should be fine as I don't think the base of the flashlight will get too hot even on turbo.
Comments, suggestions for modifications, and feedback all welcome!