1 / 12
DeWalt Toughsystem 2.0 Wall Stay For Drawer System — image 1
1 / 12

DeWalt Toughsystem 2.0 Wall Stay For Drawer System

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stay with wall bracket for the Dewalt Toughsystem 2.0 Drawers which are quite prone to falling over!

Rating
0 / 5
Likes
13
Downloads
37
Makes
0
Views
613
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Ever had the entire Dewalt Toughsystem 2.0 Drawer stack fall onto you just because you opened your top drawer?? Thought not but this… almost happened to me.. But never again will this nearly happen!

 

My Dewalt wall stay will solve this almost major problem.

 

As you will see in the pics  the stay clicks quite firmly into the top of the drawer system and then slots into the wall bracket.

One will actually do the job but two will probably keep the drawers vertical in the event of an earthquake.

 

Hope someone out there finds this useful :)

 

There are three versions of the actual stay:

Without any logo

With a logo centred

With the logo off centre.

 

Print the stay logo face down on the bed - note that the 3mf file has all the versions, choose what you want and put it/them logo face down.

 

You will need 2-4 countersunk wood screws or similar. 4mm diameter is ideal. 5mm will work but might stick out slightly.Ever had the entire Dewalt Toughsystem 2.0 Drawer stack fall onto you just because you opened your top drawer?? Thought not but this… almost happened to me.. But never again will this nearly happen!

 

My Dewalt wall stay will solve this almost major problem.

 

As you will see in the pics  the stay clicks quite firmly into the top of the drawer system and then slots into the wall bracket.

One will actually do the job but two will probably keep the drawers vertical in the event of an earthquake.

 

Hope someone out there finds this useful :)

 

There are three versions of the actual stay:

Without any logo

With a logo centred

With the logo off centre.

 

Print the stay logo face down on the bed - note that the 3mf file has all the versions, choose what you want and put it/them logo face down.

 

You will need 2-4 countersunk wood screws per bracket or similar. 4mm diameter is ideal. 5mm will work but might stick out slightly.

Tags