DeWalt Toughsystem 2.0 Wall Stay For Drawer System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stay with wall bracket for the Dewalt Toughsystem 2.0 Drawers which are quite prone to falling over!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ever had the entire Dewalt Toughsystem 2.0 Drawer stack fall onto you just because you opened your top drawer?? Thought not but this… almost happened to me.. But never again will this nearly happen!
My Dewalt wall stay will solve this almost major problem.
As you will see in the pics the stay clicks quite firmly into the top of the drawer system and then slots into the wall bracket.
One will actually do the job but two will probably keep the drawers vertical in the event of an earthquake.
Hope someone out there finds this useful :)
There are three versions of the actual stay:
Without any logo
With a logo centred
With the logo off centre.
Print the stay logo face down on the bed - note that the 3mf file has all the versions, choose what you want and put it/them logo face down.
You will need 2-4 countersunk wood screws or similar. 4mm diameter is ideal. 5mm will work but might stick out slightly.Ever had the entire Dewalt Toughsystem 2.0 Drawer stack fall onto you just because you opened your top drawer?? Thought not but this… almost happened to me.. But never again will this nearly happen!
My Dewalt wall stay will solve this almost major problem.
As you will see in the pics the stay clicks quite firmly into the top of the drawer system and then slots into the wall bracket.
One will actually do the job but two will probably keep the drawers vertical in the event of an earthquake.
Hope someone out there finds this useful :)
There are three versions of the actual stay:
Without any logo
With a logo centred
With the logo off centre.
Print the stay logo face down on the bed - note that the 3mf file has all the versions, choose what you want and put it/them logo face down.
You will need 2-4 countersunk wood screws per bracket or similar. 4mm diameter is ideal. 5mm will work but might stick out slightly.