Reusable Sanding Sticks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick and easy, reusable sanding sticks for your smaller sanding needs. Great for miniatures or gunpla.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Was looking up sanding sticks for miniature/gunpla sanding needs. Figured it's easier, faster and cheaper to just make my own.
Quick and easy prints, got labeled ones: 400, 800, 1500. Also got blanks. If more grit numbers are requested, I'll make em when get the time.
Dimension out of the box:
100mm x 20 mm x 4 mm
60mm handle and 40mm for sanding
The letters are 0.4mm deep so you can scale it by half and still get one layer for lettering, in case you need a 2mm thick sanding stick instead of 4mm
Tip: You can use the old carpenters trick to attach any sanding paper to these sticks. Slip of painters tape on the stick, a small dap of superglue on the tape, and press the sanding paper on top of the tape. This way you can replace the sanding paper easily.
Happy printing!
- Muvoksi