1 / 1
Vacuum adapter: Bosch GST 160 jigsaw to Miele vacuum — image 1

Vacuum adapter: Bosch GST 160 jigsaw to Miele vacuum

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to connect the standard Bosch suction socket for the GST 160 (B)CE to Miele household vaccums.

Rating
0 / 5
Likes
12
Downloads
84
Makes
0
Views
691
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Adapter to connect the standard Bosch suction socket for the GST 160 (B)CE (OD 28 mm, part-no. 2605730066) to Miele household vacuums (OD 35 mm). Likely also fits jigsaws of the same series, like the GST 140 (B)CE and 150 (B)CE. The fit is intentionally pretty tight and you might need to sand/file down the Z seam on the inside of the adapter for a perfect fit.

 

Print settings

Typically prints without supports. There is an inner chamfer, which stops the jigsaw part from sliding in too far. This section can be easier to print with supports enabled.

Recommended settings:

  • Layer height 0.2 - 0.24 mm
  • Line thickness 0.42 mm
  • Outer wall flow 95%

Tags