1 / 1
Vacuum adapter: Bosch GST 160 jigsaw to Miele vacuum — zdjęcie 1

Vacuum adapter: Bosch GST 160 jigsaw to Miele vacuum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to connect the standard Bosch suction socket for the GST 160 (B)CE to Miele household vaccums.

Ocena
0 / 5
Polubienia
12
Pobrania
84
Wydruki
0
Wyświetlenia
691
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Adapter to connect the standard Bosch suction socket for the GST 160 (B)CE (OD 28 mm, part-no. 2605730066) to Miele household vacuums (OD 35 mm). Likely also fits jigsaws of the same series, like the GST 140 (B)CE and 150 (B)CE. The fit is intentionally pretty tight and you might need to sand/file down the Z seam on the inside of the adapter for a perfect fit.

 

Print settings

Typically prints without supports. There is an inner chamfer, which stops the jigsaw part from sliding in too far. This section can be easier to print with supports enabled.

Recommended settings:

  • Layer height 0.2 - 0.24 mm
  • Line thickness 0.42 mm
  • Outer wall flow 95%

Tagi