1 / 7
SS Brewtech Fermenter Controller Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SS Brewtech Fermenter Controller Case for STC1000 - Fits 52l and 64l Fermenter bracket
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SS Brewtech Fermenter Controller Case for STC1000 - Fits 52l and 64l Fermenter bracket
My original controller fits the 1bbl fermenter but the shape of the smaller fermenter doesn't fit the controller. as the OEM controller is relatively expensive compared to a STC1000 controller it makes sense to just use a controller I already had.
BOM
- 3 DC sockets, 1 @ 5.5x2.1 and 2 @ 5.5x2.5 (Power in is 2.1 this stops you pushing the power into the wrong socket)
- 1 Switch
- 1 STC-1000 controller
Supports are not needed if your printer is setup and capable of bridging. Print the Top body on the top flat surface
I printed mine with 0.2 layer height with Marvle3d ABS+ on my K1 Max