1 / 2
Thin filter drawer for QHY and Touptek cameras — image 1
1 / 2

Thin filter drawer for QHY and Touptek cameras

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 15.5mm thick filter drawer for 2 inch filters that takes up lesser backfocus distance compared to commercial options

Rating
0 / 5
Likes
3
Downloads
16
Makes
0
Views
103
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A 15.5mm thick filter drawer for 2 inch filters that takes up lesser backfocus distance compared to commercial options. The drawer uses 2 6x3mm magnets to stay in place. The design uses 4 long (20mm) M3 screws and 2 short M3 screws so the weight of the camera is supported better. I printed this in CF-PET and didn't notice any significant tilt issues when using with a Rokinon 135mm lens at f/2. 

Here's how I use it with the Rokinon 135mm lens which needs a total backfocus distance of 44mm:

ComponentBackfocus
QHY268C23.5
Filter drawer15.5
QHY M48 adapter ring5
Total44

Here's how to use this with an OAG setup with a 56mm backfocus distance requirement:

ComponentBackfocus
QHY268C23.5
Filter drawer15.5
QHY OAG M Pro12
QHY OAG M Pro M54 adapter ring5
Total56

This can in theory be printed in PLA, but would highly recommend printing in some filament that has higher rigidity like CF-PET, CF-PA6, etc.

Tags