Osvac Neo F32H34 45+Dust Commander M32H50 adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom 3D-printed adapter connecting Lavor vacuum (34mm) to Dust Commander via Osvac Neo system with 45° angle
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After converting all the power tools in the woodworking shop to the Osvac Neo system, the main piece was missing: the suction part that goes from the Lavor Pro Em Worker vacuum cleaner to the Dust Commander.
The Lavor's corrugated hose has a diameter of 34, which isn't the Osvac standard (32), and the angle wasn't right (completely vertical on the Dust Commander).
So I first made a 90-degree adapter for the Dust Commander, which has an M32 outlet. Then, I modified the Osvac Neo project and made an F32H34 adapter to directly connect the vacuum cleaner's corrugated hose. Then, using Rhinoceros, I added the 45-degree angle to avoid straining the hose.
Printed with Qidi Plus4 With simple PLA, 0,20, 15%. No particular settings.