1 / 4
Osvac Neo F32H34 45+Dust Commander M32H50 adapter — zdjęcie 1
1 / 4

Osvac Neo F32H34 45+Dust Commander M32H50 adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom 3D-printed adapter connecting Lavor vacuum (34mm) to Dust Commander via Osvac Neo system with 45° angle

Ocena
0 / 5
Polubienia
3
Pobrania
43
Wydruki
0
Wyświetlenia
323
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After converting all the power tools in the woodworking shop to the Osvac Neo system, the main piece was missing: the suction part that goes from the Lavor Pro Em Worker vacuum cleaner to the Dust Commander.
The Lavor's corrugated hose has a diameter of 34, which isn't the Osvac standard (32), and the angle wasn't right (completely vertical on the Dust Commander).
So I first made a 90-degree adapter for the Dust Commander, which has an M32 outlet. Then, I modified the Osvac Neo project and made an F32H34 adapter to directly connect the vacuum cleaner's corrugated hose. Then, using Rhinoceros, I added the 45-degree angle to avoid straining the hose.

Printed with Qidi Plus4 With simple PLA, 0,20, 15%. No particular settings.

Tagi