DSA Keycap 1u with Light window
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.34 – €1.63 net (excluding VAT)
For file: Custom DSA 1u key Set of 12_0.2mm_PLA_MK3S_1h45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.48 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.75 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A semi-low-profile keycap with a thin window for light to peak through.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 200
- Makes
- 4
- Views
- 1,597
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
In prusa slicer I recommend turning on seam position to the rear (under layers and perimeters) when making a bunch of these keys. To me it looks more tidy than random seam breaks around the keys.
For the top of the key turning on Archimedean Chords on bottom fill pattern looks nice. I've noticed with this setting on though there are gaps sometimes, adding small steps of .05 to Extrusion multiplier (under filament settings) normally fixes the problem.
Keycap works with standard MX stems and Kalih.
I've only attempted this with PLA and PETG at 0.2mm.
Filament in photo is Hatchbox Dark Green PETG.