1 / 6
Burr Holder: Baratza ESP Encore
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for a burr in Baratza ESP Encore Coffee Grinder
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 202
- Makes
- 1
- Views
- 613
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print fits and work great. I will propably make some other replacement/mods for Baratza encore esp.
Recommended Printing Settings
Layer Height: 0.16 mm
Brim: Auto inner brim (8-10 mm)
Walls: 3-4 (infill optional, 15-30%)
Supports: Normal/auto + adjacent; tree/organic type; top Z distance 0.16-0.20 mm
Orientation: Upside-down (preferred) or 45° tilt for better strength
Scaling: 100%; reduce 0.18% if not tight enough
Filament: PETG recommended
If you like this model please like it on makerworld[Link for Model]