Fireplace Incense Burner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fireplace-shaped incense burner
- Rating
- 4.333 / 5
- Likes
- 51
- Downloads
- 169
- Makes
- 2
- Views
- 665
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone, I'm sharing with you an incense burner I made in the shape of a fireplace.
This is the first time I'm sharing something here, so please feel free to give me any feedback.
I printed it using PETG, which has a higher heat resistance than PLA. I used standard printing settings with a layer height of 0.2mm, 2 walls, and 15% infill.
For the fireplace opening, I used tree supports. I didn't have any problems during printing, and the parts fit together as expected.
I hope you like it.
I've updated the image and added a version of the chimney that's 3.5cm taller than the smaller one, making it 17.1cm high. I hope this helps with larger incense sticks. I've also added a small 3.5cm tall section of the chimney for those who have already printed the smaller version and need to increase its height slightly.
I hope this helps.