Fireplace Incense Burner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fireplace-shaped incense burner
- Ocena
- 4,333 / 5
- Polubienia
- 51
- Pobrania
- 169
- Wydruki
- 2
- Wyświetlenia
- 665
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone, I'm sharing with you an incense burner I made in the shape of a fireplace.
This is the first time I'm sharing something here, so please feel free to give me any feedback.
I printed it using PETG, which has a higher heat resistance than PLA. I used standard printing settings with a layer height of 0.2mm, 2 walls, and 15% infill.
For the fireplace opening, I used tree supports. I didn't have any problems during printing, and the parts fit together as expected.
I hope you like it.
I've updated the image and added a version of the chimney that's 3.5cm taller than the smaller one, making it 17.1cm high. I hope this helps with larger incense sticks. I've also added a small 3.5cm tall section of the chimney for those who have already printed the smaller version and need to increase its height slightly.
I hope this helps.