Single axis Raspberry Pi 3 B+ HQ Camera Mount for SB Components enclosure.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple friction fit, single axis camera mount. Designed for the SB Components RPI enclosure.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A friend couldn't find a good enclosure and mount solution so I cooked this up.
It's designed to fit the SB Components RPI enclosure: https://www.digikey.com/en/products/detail/sb-components-ltd/SKU02696/24759050
There are lots of identical and similar enclosures from other sellers but I've only tested with this one.
I used this 3/8" Tripod screw for the mount. Should work ok with similar hardware.
https://www.amazon.com/dp/B00ZSSM368
There is a thin sacrificial layer covering the back of the mount holes to help them print better in a vertical orientation. you should be able to screw right through it or just remove it with a sharp blade.
Print with the broad face of the camera mount against the print bed, no supports. (Default orientation of the STL is wrong, you'll need to flip it)
Mounted with #6x1/2 flathead wood screws in the picture.