Filament tube holder for Prusa CORE One with MMU3
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.06 – €0.08 net (excluding VAT)
For file: Tube loop_0.4n_0.15mm_PETG_COREONE_4m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A loop that holds a 4mm PTFE tube at the roof of the CORE One printing chamber. Uses the MMU screws.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
This small loop attaches to the roof of the CORE One printing chamber and holds a 4mm PTFE tube. The screw of the MMU may be used to attach it.
I made this to guide the side input tube up to the MMU tube, which are then connected with a Y-splitter. This way you don't have to switch tubes at the printhead when switching from the side input to the MMU.
Printing
Use a filament that can withstand the expected temperature inside your printing chamber. I used ASA, PETG should be sufficient in most cases, and I would not recommend PLA.
Layer height: 0.15mm
Infill: 100%
Supports: No
Installation
(Re-)use one of the screws that attach the MMU to the CORE One (see photo).