Box to store SYS3 Systainer Attic Bit holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple box protecting the SYS3 Attic bit holder to easy carry them on works.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 7
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Looking at different sites to find supports for my Festool Centrotec, I found very interesting ones but always to be installed on the lid of some Systainer from Festool or Tanos.
As as I don't have such type of Systainer, I decided to make a small box easy to print and protecting several supports. The Festool lid is designed for 3 supports and I preferred to make a group of 4 due to the different types of bits I have.
My idea was to use the support itself to increase the rigidity of the box, so I made it without full bottom and top. I designed the box to put 4 supports, 2 on each side and to be able to close it, using a magnet to secure it. The magnets are 8x3mm neodymium magnet inserted using a vice - no glue. The hinge is made with a 3 mm brass rod and you need 2 lengths of 40mm.
If you want to make two or more boxes, it is possible to stack them. The cover has 4 holes and the base has 4 spindles.
The inserts are from "illladelph" under https://www.thingiverse.com/thing:6208625https://www.thingiverse.com/thing:6208625. Except the one for 6.35 socket I described in another creation.