Box to store SYS3 Systainer Attic Bit holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple box protecting the SYS3 Attic bit holder to easy carry them on works.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Looking at different sites to find supports for my Festool Centrotec, I found very interesting ones but always to be installed on the lid of some Systainer from Festool or Tanos.
As as I don't have such type of Systainer, I decided to make a small box easy to print and protecting several supports. The Festool lid is designed for 3 supports and I preferred to make a group of 4 due to the different types of bits I have.
My idea was to use the support itself to increase the rigidity of the box, so I made it without full bottom and top. I designed the box to put 4 supports, 2 on each side and to be able to close it, using a magnet to secure it. The magnets are 8x3mm neodymium magnet inserted using a vice - no glue. The hinge is made with a 3 mm brass rod and you need 2 lengths of 40mm.
If you want to make two or more boxes, it is possible to stack them. The cover has 4 holes and the base has 4 spindles.
The inserts are from "illladelph" under https://www.thingiverse.com/thing:6208625https://www.thingiverse.com/thing:6208625. Except the one for 6.35 socket I described in another creation.