Common comics villain - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Common comics villain - HueForge - 200x200x1.5mm - Frameless - Image AI generated
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.6mm and the Actual Thickness is 1.6mm
Filaments used:
#000000 Black Transmission Distance: 0.1
#8b8f98 Dark Gray Transmission Distance: 0.3
#c4c4c4 Light Gray Transmission Distance: 3.1
#ffffff White Transmission Distance: 5.6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Gray
At layer #8 (0.72mm) swap to Light Gray
At layer #12 (1.04mm) swap to White for the rest.