CyberFrelon 3" toothpick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3" toothpick made with 5mm (3mm internal) carbon fiber tube and ABS parts
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use ABS for best results.
Parts are optimized for 0.2 layer height and 0.5mm line width. Do not print supports and use 15% triangles infill for 'arms-hub' Print 2 pieces of each type of motor mount parts.
Cut 4x 70mm of carbon fiber tube (5mm external diameter, 3mm internal). Assemble the tubes in the ABS hub with CA glue. Re-drill the holes of the motor mounts with a 2mm drill bit. Use M2 screws : 10mm for the motors, 16mm for the canopy (but 10mm for rear hole), 5mm for the camera.
Parts used in this build: 25.5x25.5mm HACKRC AIO F722 35A ESC TBS Unify Pro32 Nano VTX BetaFPV ELRS nano receiver (smd antenna) Caddx Ant camera TrueRC Ufl antenna VCI SPark 1204 4500kv motors Gemfan 3016*3 props Ovonic 650mAh 3S lipo
Running Quicksilver, the quad flies pretty well :)