Revopoint MetroY PRO Combomount

Long story short - I REALLY didn't like the Mobile Kits Clamp Style Cellphone Mounting Solution for when using Revo Mirror hence why I decided to make this MagSafe Alternative also incorporating a Camera Light Attachment.

Print Instructions:

• Print with the usual Voron recommended 4x Perimeter / 40% Infill Settings.
• Layer Height doesn't really matter but I suggest the usual 0.2mm.
• The Parts come prealigned and shouldn't require Supports. 

BOM:

• 2x Voron Style M3 Heat Set Inserts
• 2x M3x10mm Countersink Head Screws
• 1x ¼" Heat Set Insert ( short Variant )
• 1x MagSafe Camera Mount
• 1x Revopoint Photo Light ( optional )
• 1-2x ¼" Thumb Screws
• 1-2x ¼" Socket Head Cap Screws

Assembly & Installation Instructions:
Install the three Heat Set Inserts into the Main Body using a Soldering Iron ⬇
( ensure all of them - the ¼" in one particular - sit below the surface )

Align the MagSafe Camera Mount to the back of the Main Body and secure with ¼" Socket Head Cap Screw ⬇

Insert the ¼" Thumb Screw and cap off with the Catch Part and secure the latter with 2x M3x10mm Countersink Head Screws ⬇

OPTIONAL If you bought a Revopoint Photo Light - the front Hole of the Foot Part needs to be cleaned of the modeled in Hole Bridging Supports using a Modelling Knife first. Thread the ¼" Thumb Screw into the rounded back of the Foot ( this Hole is undersized to prevent that Screw from falling out ) and the ¼" Socket Head Cap Screw into the front ( this Hole is loose with the intent of keeping the Photo Light attached to the Foot ) ⬇