Lithophane Holder with RGB Backlight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for Lithophane Print with Node32s Microcontroller, 8 Pixel Neopixel Ring and USB-C
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 29
- Makes
- 0
- Views
- 811
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
This Print houses an Node32s Microcontroller, USB-C Breakout Board, 8 Pixel Neopixel (WS2812B) Ring and holds an Lithophane. You can programm the Node32s to light up the Neopixel Ring in any color and do animations. If you have a home assistant install at home, you can integrate it with esphome to act as a smart lamp.
The USB-C Breakout board is a random one i had lying around. In the case there is not a lot of room so if you want to print this, i reccomend to size the compartment for the microcontroller up a bit to fit all the cables!
The USB-C Breakout board needs two 5,1K Resistors from A5 and B5 to Ground to indicate it needs 5V.
To generate the Lithophane i used this website: https://3dp.rocks/lithophane/
I uploaded the picture i wanted to use (1280x1280px) and selected the “Outer Curve” Preset. I Changed the “Maximum Size” to 80mm and selected “Positive Image” rather than “Negative Image”.
The holes are for M2 Inserts from ruthex: https://www.ruthex.de/collections/gewindeeinsatze/products/ruthex-gewindeeinsatz-m2-m3-m4-m5-sortimentskasten-70-100-50-50-stuck
The Lithophane sits slightly tiled so it can be nicely viewed from the desk.