Vacuum Hose Adapter 1-3/4" to Dewalt Table Saw and Chop Saw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect your 1-3/4" shop vac hose to a tool with a ~2-1/4" INNER diameter or ~1-5/8" OUTER diameter port
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 1
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Double-check print orientation before printing! There's a ledge inside where the two different inner diameters meet; you'll get better results with the thicker end down.
This 1-¾" vacuum hose adapter is based on an older (~2010) Ridgid shopvac, and was designed to fit both (not simultaneously) a Dewalt table saw and chop saw - also a few years old so verify your own diameter rather than just the model numbers below.
It can be used to join any ~1-¾" hose to any 2-¼" inner diameter or 1-5/8" outer diameter port.
The design is a cylinders with 3x tapers to allow clearance at the opening and a good sealed interference fit as you press in the hose and/or adapter.
Shop vac model: Ridgid WD1636 Wet/Dry Vacuum, 1-¾" outer diameter hose
Table saw model: Dewalt DW745 Compact Portable Jobsite Table Saw, 2-¼" inner diameter port
Chopsaw model: Dewalt DWS713 10 in. Compound Single Bevel Miter Saw, 1-5/8" outer diameter port
