Buddy3d camera light shade for use with Prusa enclosure and LED strip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
cover to prevent light leak to buddy3d camera picture
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 1
- Views
- 281
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
When using Buddy3D Camera for Prusa CORE One in Original Prusa MK4/S Enclosure, together with White LED Strip, light will leak into the camera picture, lower the contrast and quality. I created small, simple cover to improve the situation. See attached picture
Includes cut out for usb-c cable for camera.
Cover is held between the top light strip and enclosure. Has channel to route power cable of camera.
Would suggest to print it with dark material.
Remove top screw holding the light strip. Slide the cover between the enclosure profile and led bracket. Tighten the screw back.