Crystal Cribbage Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to create some unique Christmas gifts. It's printed from Polycarbonate with a lot of post possessing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- GNU General Public License v3.0
I wanted to produce some unique gifts and came up with this print. It did require a fair amount of post processing. This was printed on an Ender 3 V.2 Neo (modified with a heated enclosure). Because I wanted a highly polished look it was printed from transparent Polycarbonate. It was printed with three bottom layers and six top layers since a lol of sanding is required to remove all the layer lines. It then was polished using an automobile polish and an orbital buffer.
I used two perimeters and 15% grid infill, you can chose whatever you want for this. It's possible you could print this from ABS/ASA and use acetone smoothing, but I haven't tried that and don't know how it would turn out. It would save a lot of time sanding though. The pegs were printed standing on their heads with a brim.