1 / 2
EVA Queen Shroud with Adafruit LIS3DH accelerometer mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you want to do input shaping with the LIS3DH on your EVA mount, this lets you mount it to the shroud!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 43
- Makes
- 1
- Views
- 988
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
I wanted to try input shaping on my new RatRig V-Core 3 with a Duet 3 Mini 5+ and an Adafruit LIS3DH accelerometer, but the existing mounts seemed to be for the ADXL ones. So I remixed this to fit mine.
Some tips…
- Use a USB 3.0 cable for the wiring, I tried all sorts of cables but had all sorts of issues until I used this type
- Add hotglue to the wires
- You might need a little bit of superglue if the M2.5 bolts are too loose
- Oh, you'll need two M2.5 10mm bolts!
This is based on the wonderful work of Paweł Kucmus who contributed the original to the EVA project:
https://main.eva-3d.page/queen/