Evolve GTR Skateboard All-Terrain 175mm Wheel Fenders (Mud Guards) with AirTag
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
remix of the Evolve GTR Skateboard All-Terrain 175mm Wheel Fenders (Mud Guards) with a well secured AirTag
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Let's say your evolve GTR skateboard was stolen, wouldn't it be nice to try to find it again? I've remixed the fenders to have a spot for a well secured AirTag. Thanks @Gustav_24630 for making the AirTag outline - it worked a treat!
Materials
- 4x tube clamps 44mm diameter <10mm width (e.g., https://www.bunnings.com.au/kinetic-33-57mm-304-stainless-steel-hose-clamp_p0110740)
- 4x socket head M4 bolts (6mm) and hex nuts
Printing
This can be tricky given the parts were designed for fit, function and appearance and need supports
- Print fender with support; oriented rim down; this will optimise the external surface
- Mirror the fender in your slicer to print the opposite side
- 0.4mm nozzle, 0.2mm layer height, 40% infill and use a plastic that's UV resistant
- For TPU fenders print using a toolchanger with PLA support
- pause the print to allow insertion of the 4x hex nuts
- No supports are needed to print the cover
Installation
Use these fenders at your own risk. Installation may void warranty. No responsibility is taken for skateboard damage, injury or skateboard theft. Depending on your plastic of choice you may need to add a sealant to improve waterproofing.
Front Fenders
- Insert your AirTag and secure with the cap and 4x M4 bolts
- Feed the 2 tube clamps around the slot, you may need to bend the hose clamp to have the right curve before you start. Don't close them yet
- Place the fender on the front axle and secure the tube clamps with the support bracket, paying attention to the camber of the axle