Parametric Glove 80 Tenting base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glove 80 Keyboard tenting stands either as a full base or only partial 3 point riser. V0.92 - "Cone of Shame"
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 39
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
For the excellent Glove 80 Keyboard i am experimenting with tenting and dont want to memorize the heigths of the tenting screws.
Note: for the full version there was a minor clearance issue so the electronics compartment rests on the wall unless you use the foot-screws a bit...
Two new parameters (batteryBulge... in the Bottom Plate section) should give enough clearance around .7 to .9 and .2 to .5 respectively? Unfortunately the previous version was the only thing i was able to fit on my Mini withouth the normal safety precautions and without the "dog cones" on the high outer feet (see cyan and dark green on reference).
--
2026-02-21: Update for "dogs cones" so the foot rests better in the support point and the whole contraption can be easier moved around on the desk (parameters are a bit wonky but work ok-ish). These are added at the outer foot supports only. Overhauled the positioning with a preview (left side only) for reference in case one wants to move things around or tweak a bit.
Ran a full-scale test print and it works OK-Ish but i prefer th smaller version with walls so i can leave small things in there but dont have the giant tray.
Added comments to most parts where seen fit and had to give all vectors a color and a preview option because I couldn't wrap my head around a few things 3 Months later :(.
2025-11-01: Update for more flexibilty and descriptions of the parameters. Also fixed 1/10th scaling issue.