Parametric Glove 80 Tenting base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glove 80 Keyboard tenting stands either as a full base or only partial 3 point riser. V0.92 - "Cone of Shame"
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
For the excellent Glove 80 Keyboard i am experimenting with tenting and dont want to memorize the heigths of the tenting screws.
Note: for the full version there was a minor clearance issue so the electronics compartment rests on the wall unless you use the foot-screws a bit...
Two new parameters (batteryBulge... in the Bottom Plate section) should give enough clearance around .7 to .9 and .2 to .5 respectively? Unfortunately the previous version was the only thing i was able to fit on my Mini withouth the normal safety precautions and without the "dog cones" on the high outer feet (see cyan and dark green on reference).
--
2026-02-21: Update for "dogs cones" so the foot rests better in the support point and the whole contraption can be easier moved around on the desk (parameters are a bit wonky but work ok-ish). These are added at the outer foot supports only. Overhauled the positioning with a preview (left side only) for reference in case one wants to move things around or tweak a bit.
Ran a full-scale test print and it works OK-Ish but i prefer th smaller version with walls so i can leave small things in there but dont have the giant tray.
Added comments to most parts where seen fit and had to give all vectors a color and a preview option because I couldn't wrap my head around a few things 3 Months later :(.
2025-11-01: Update for more flexibilty and descriptions of the parameters. Also fixed 1/10th scaling issue.