Rolling Tray and Dice Holder: 6x3mm magnet REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.42 – €12.74 net (excluding VAT)
For file: dice-tray-both_0.2mm_PLA_MINI_10h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.58 excluding VAT (range midpoint).
- Weight reported by the author
- 163 g
- Print time reported by the author
- 10.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dice rolling tray with storage built-in. I wanted a version for the magnet size I had on hand, so I made one.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 60
- Makes
- 1
- Views
- 591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Overall dimensions at 180 x 120 x 30mm. Magnets used are 6mm diameter x 3mm height. The inside rolling area is ~112mm x 118mm.
Designed for a press-fit of magnets, so it might be tight. Make sure you have a well-tuned printer and try the test piece first. Sometimes it comes out slightly loose, I've had one out of 40 tests be loose, if this happens just use super glue. Make sure to use very little glue because glue squeezing out will make the fit less flush.
You may want to add some sort of felt to the bottom, but it totally works fine without it. It mostly comes down to the sound you want when rolling.
Sean Rogers made the original: https://www.prusaprinters.org/prints/13208-dice-holder-and-dice-tray
go check that model out if you need a 5x1mm magnet version, or if you just want to support the original.